1,Introduction
The Model GGS42-2A HTHP Filter Press can be used to measure the filtration rate of drilling fluids and cement slurry under the condition of deep wells (HTHP), at the same time can be used to prepare the mud cake formed after filtration under the HTHP conditions. It possesses the characters of high precision, small error, simple operation and accurate measured data. The apparatus has been used extensively in various oil-fields, research institutions and laboratories.
The instrument is designed according to recommended program issued by API. It can be used in the temperature range from room temperature to150ºC. The maximum working pressure for the testing cup of drilling fluids is 4.2MPa. When pressure difference of filtration is equal to 3.5MPa, the important data such as static filter loss and character of filter cake after filtration can be determined under the condition of HTHP after drilling fluids flow through filter area of 22.6cm
2 for 30min. Compared with the same series of GGS42-2 HPHT pressure filter, its temperature control system adopts the most advanced electronic temperature controller in the world, which has the characteristics of high temperature control accuracy, good repeatability, simple operation and accurate test data
2,Type Specification
Model |
Name |
Configuration |
GGS42-2A |
HTHP Filter Press |
PID Temperature control |
3,Technical Specification
No. |
Technical Specification |
1 |
Power supply |
220V±5% 50Hz |
2 |
Rated power |
400W |
3 |
Drilling fluid cup's working pressure |
4.2MPa |
4 |
Limit pressure of the drilling fluid cup |
8MPa |
5 |
Back pressure |
0.69MPa |
6 |
Drilling fluid cup's capacity |
175ml |
7 |
Effective drainage area |
22.6cm2 |
8 |
Air supply |
Nitrogen, carbon dioxide gas (without oil, water and other impurities) |
9 |
Working temperature |
At room temperature to 230 ºC |
10 |
Net weight / Gross weight |
13.26kg/19.3kg |
11 |
Overall dimensions |
500×300×560mm |
12 |
Packing size |
560×425×265mm 310×290×285mm |