1. Introduction
The Pressurized Curing Chamber is used for curing tensile or compression specimens of oil well cements at elevated temperatures and at pressures above atmospheric, simulating conditions in the well.
Briefly, the procedure is to prepare the test specimens according to API Spec. 10
(1). The specimen slurries are poured into molds, and the molds are lowered into the pressure curing cylinder. The cylinder plug is installed, the thermocouple is inserted into the cylinder head, and the cylinder is filled with water to expel air. Heat, regulated by an Automatic Temperature Program System, and pressure are then applied to the cylinder in accordance with applicable schedules of API Spec. 10
(1). Maximum pressure and temperature are maintained until shortly before the end of the curing time specified. The temperature is then reduced, pressure is regulated to atmospheric, and the test specimens are removed for testing.
2. Type Specification
| Model |
Name |
| HTD7360 |
Pressurized Curing Chamber |
3. Technical Specification
| No. |
Technical Specification |
| 1 |
Input voltage |
AC220±10% 50Hz |
| 2 |
Total power |
3.5 KW |
| 3 |
Maximum temperature |
500°F/260°C |
| 4 |
Maximum pressure |
6000 psi/41 MPa |
| 4 |
Compressed air |
0.69MPa |
| 4 |
Operating environment temperature |
32°F - 105°F/0ºC-40ºC |
| 5 |
Working environment humidity |
0 - 95RH% |
| 6 |
Net weight / Gross weight |
130kg/180kg |
| 7 |
Overall dimensions |
680×370×560mm |
| 8 |
Packing size |
1000×1000×1100mm |
Audited Supplier 
){kind=link}
){kind=link}