hand operated centrifuge / 0~1800r/min
1. Introduction
The potassium ion in the drilling fluid aims to stabilize shale and restrain the clay's dilatability. Therefore the potassium ion content must be measured accurately so as to control the performances of drilling fluid. HC-2100 hand operated centrifuge is used to measure the potassium ion content in the drilling fluid whose potassium ion content is more than 5000mg/l or KCl concentration is bigger than 3.5lb/bbl. Use the perchloride to deposit the potassium ion in the centrifuge, then determine the volume of the deposit, and numerate the content from the criterion curve.
The potassium ion in the drilling fluid aims to stabilize shale and restrain the clay's dilatability. Therefore the potassium ion content must be measured accurately so as to control the performances of drilling fluid. HC-2100 hand operated centrifuge is used to measure the potassium ion content in the drilling fluid whose potassium ion content is more than 5000mg/l or KCl concentration is bigger than 3.5lb/bbl. Use the perchloride to deposit the potassium ion in the centrifuge, then determine the volume of the deposit, and numerate the content from the criterion curve.
2. Type Specification
Model |
Name |
SY-3 |
Hand Operated Centrifuge |
3. Technical Specification
No. |
Name |
Technical parameter |
1 |
Speed range |
0~1800r/min |
2 |
Be adapted to |
100g Pear type centrifuge tube |
4. Working principle
Measured sample in the centrifugal tube is centrifuged by the high speed rotation, so the deposits are separated from the liquid, and its content can be determined by graduated vessels.