Qingdao Senxin Group Co.,Limited
Add: Hubei Road, Huangdao Zone,Qingdao City,China
Web:senxingroup.en.made-in-china.com
The new 4-Unit HTHP (also known as HPHT) Filter Press from SENXINGROUP is ideal for high-volume laboratory testing. It accommodates four 175-mL HTHP filter press cells. Each cell has a separate electronic temperature controller and two separate pressure regulators (drive pressure and back pressure). This allows each cell to be heated and pressurized independently, while still sharing a single pressure source.
Features
Four independent test stations
Electronic temperature control
Drive pressure and back pressure regulators for each cell
Single pressure source
Complete with all accessories necessary to run four simultaneous tests
Specifications
Maximum Temperature: 425°F (218.3°C)
Maximum Drive Pressure: 1,350 PSI (9.3 MPa)
Maximum Back Pressure: 750 PSI (5.2 MPa)
Cell Size: 175 mL (test cells sold separately)
Pressure Requirements: 3,000 PSI (20.7 MPa)
Power Requirements: Two 115-Volt or 230-Volt AC Power Sources
Components
#120-70-1-021: Gauge for Back Pressure, 1000 PSI
#120-70-1-022-1: Gauge for Top Pressure, 1500 PSI
#120-70-1-052: Hose, Stainless Steel
#153-14: Graduated Cylinder
#170-06-1: Back Pressure Receiver
#170-19: Filter Paper, 2.5" (6.35 cm) Diameter, Box of 100
#170-20: Manifold Block
#170-93: Wrench for Valve Stem
#171-23-1: Safety Pin with Lanyard
#171-45-7: Thermocouple
#174-03: Temperature Controller
Optional
#170-12-1: Test Cell for Filter Paper, 175 mL, Single Cap
#170-40: Cell Carrying Tool
#170-45: Test Cell with Cement Screens, 175 mL, Locking Screws, Double Cap
#170-46: Test Cell for Ceramic Disks, 175 mL, Locking Screws, Double Cap
#170-181-S: Test Cell for Drilling Fluids, 175 mL, Threaded
#170-182-S: Test Cell for Cement, 175 mL, Threaded
#171-190-028: Cell Stand
#170-91: HTHP Pressure Relief Tool
#170-00-4S-SP: Spare Parts Kit
#170-00-4S-LC: Load Cell Option
The 4-unit Model MB HTHP Filter Press assembly is designed for testing drilling fluids and cement under elevated temperatures and pressures. This simulates various downhole conditions and provides a reliable method for determining the effectiveness of the material being tested. The complete assembly consists of four standard 250-mL filter presses mounted in a convenient frame for regular laboratory or drilling rig usage. All filter press units are complete and ready for use after the assembly has been connected to a source of compressed nitrogen.
Features
Four Model MB filter presses mounted in a convenient installation for regular laboratory or drilling rig usage
Includes a dual nitrogen manifold for supplying up to 1250 PSI pressure to the cell and up to 750 PSI to the back pressure assemblies
All four (4) units are supplied nitrogen at the same pressures
Both the high pressure to the cell and the back pressure can be controlled ON/OFF individually by valves mounted at the front of the work table base
High performance hoses, connections and valves
Dual manifold back connection assembly has a standard ¼" pipe thread (NPT) with a ¼" tubing fitting
Specifications
Maximum Temperature: 350°F (176°C)
Maximum Pressure: 1,500 PSI (10,342.5 kPa)
Pressure Source: Nitrogen (at least 1500 PSI / 10,343 kPa)
Test Cell Capacity: 250 mL
Voltage: 115V or 230V (built to specification)
Heater: 200 Watt
Size: 39.25" × 25.75" × 37.5" (99.7 × 65.4 × 95.3 cm)
Weight: 175 lb (79.5 kg)
Shipping Size: 46" × 31" × 44" (117 × 79 × 112 cm)
Shipping Weight: 250 lb (113.4 kg)
Components
#142-58: O-ring for Coupling
#152-38: AC Power Cord
#153-16: Graduated Cylinder, 25 mL × 2/10 mL, Glass
#154-10: Thermometer with Metal Dial, 5" Stem, Dual Scale: 50° - 500°F / 0° - 250°C
#170-07: O-ring for Back Pressure Receiver
#170-11: Heating Element, 200 Watt
#170-19: Filter Paper, 2.5" (6.35 cm), Box of 100
#170-32: Needle Valve, 1/8" × 1/8" NPT
#170-34: Needle Valve, 1/4" × 1/4" NPT
#171-25-1: Relief Valve, 750 PSI
#171-25-2: Relief Valve, 1350 PSI
#171-38: Gauge, 1000 PSI
#171-40: Gauge, 1500 PSI
#171-42: Gauge, 3000 PSI
#171-52: O-ring for Cell
#171-54: Fuse
#171-56: Test Cell, Model MB
#171-58: Back Pressure Receiver
#171-79: Hex Wrench
Audited Supplier 
){kind=link}
){kind=link}