1.Introduction
The high-pressure visual plugging tester is in the high-pressure visual cylinder, and the penetration of drilling fluid under high pressure is observed through the visible window. The instrument is mainly composed of base, bracket, visual barrel, material barrel, control cabinet and so on.
The instrument uses a drilling fluid cup with a see-through barrel. The strength is high, the pressure resistance can reach 3MPa, the length of the drilling fluid cup is 1 meter; the pumping device is added; the diameter of the lower liquid discharge valve channel becomes larger, which completely solves the previous problem of depression.
2.Specification and Model
| Name |
Model |
| High-pressure Visual Plugging Tester |
HTD18986 |
3.Working Principle
The high-pressure visual plugging Tester is to press the drilling fluid under the pressure of the gas source, and complete the measurement of the drilling fluid through the penetration of the drilling fluid under high pressure.
4.Technical Parameters
| No. |
Technical Specifications |
| 1 |
Gas source |
Nitrogen, carbon dioxide.
Oxygen is prohibited. |
| 2 |
Gas source pressure |
0~16MPa |
| 3 |
Visual barrel pressure |
0~3MPa |
| 4 |
Barrel pressure |
0~2MPa |
| 5 |
Visual barrel capacity |
1800mL |
| 6 |
Barrel capacity |
4000mL |
| 7 |
Net weight/Gross weight |
370/465kg |
| 8 |
Overall Dimensions |
2000x1000x1850(mm) |
| 9 |
Packing Size |
2200x1200x2050(mm) |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}